New
Kalamazoo Ind. 14" HEAVY DUTY ABRASIVE CHOP SAW Stand Model K12-14SS
Saws, Abrasive Saws| $2,590.00 USD |
.jpeg)
.jpeg)
.jpeg)
K12-14SS 14 inch industrial abrasive chop saw with stand is dry v-belt driven chop saw that’s designed to cut 2.5″ solids and 3″ pipe quickly with the right cutoff wheels. This saw can also cut hose and tubing. This cutoff saw is designed to hold an abrasive cutoff blades that are either 12” and or 14” in diameter.
Optional:
KAB14R 14 inch reinforced abrasive cutoff wheel (1 box)
KAB12R 12 inch reinforced abrasive cutoff wheel (1 box)
702-004 14 INCH ABRASIVE CUTOFF SAW SPINDLE ASSEMBLY (1" or 1.25")
044-001 INDUSTRIAL CHOP SAW AND BELT SANDER BALL BEARING
701-002 SAW SPINDLE AND FLANGE (1" or 1.25")
051-035 14 INCH CHOP SAW V-BELT TENSIONING TOOL
912-015 INDUSTRIAL ABRASIVE CHOP SAW METAL CAM LOCK VISE
431-001 INDUSTRIAL ABRASIVE CUTOFF SAW VISE FRONT JAW
431-002 INDUSTRIAL ABRASIVE CHOP SAW REAR VISE JAW
| Type: | Dry |
| Enclosed (Y/N) | No |
| RPM | 4400 rpm |
| Dimensions | L 38″ x W 36″ x H 36″. |
| Weight | 250 lbs |
5HP TEFC motor
($2590) 3PH 220/440 volt
($2890) 1PH 220V
Three phase amp draws: 230V 12 amps and 460V 6 amps.
Single Phase amp draw: 19.5 amps
1″ wheel arbor.
This machine can accommodate a 12″ or 14″ diameter abrasive blade (blade not included).
Motor RPM: 3450 RPM
Spindle RPM: 4400 spindle RPM.
Magnetic on/off switch.
Cast iron base.
Cast iron trunnion.
Cast iron arm.
Sealed ball bearings.
That can accommodate a 12″ or 14″ diameter abrasive blade ( not included).
Positive, quick-lock swivel vise that opens 4″.
32″ steel stand.
Motor stop assembly (owner can adjust how far the motor can back).
Shipping weight: 300 lbs.
Shipping dimensions: L 28″ x W 40″ x H 36″